We Design. We Build. We Deliver.
Precision-engineered air moving equipment optimized for Algerian industrial environments, commercial HVAC, and heavy-duty ventilation.
The industrial landscape in Algeria—spanning key hubs from Algiers, Oran, and Hassi Messaoud to Skikda, Rouiba, and Constantine—demands exceptionally rugged air moving equipment. Operating conditions in North Africa require radial blowers and centrifugal fans that combine strict adherence to European Safety Standards (CE certification) with advanced mechanical durability to survive high ambient operating temperatures, abrasive sand and dust ingress, and continuous 24/7 duty cycles.
As a senior global manufacturer and trusted supplier of electromechanical components, Altran Magnetics brings decades of engineering design expertise to the Algerian industrial market. Our comprehensive range of single-inlet radial fans, double-inlet centrifugal blowers, forward and backward curved turbine extractors, and direct-drive motor assemblies are built around high-efficiency copper motor windings, dynamically balanced metal impellers, and heavy-gauge galvanized steel enclosures.
Designing centrifugal blowers for Algerian manufacturing plants, oil refineries, and commercial HVAC networks involves overcoming severe micro-climatic stress factors. Facilities located in Saharan zones (such as Hassi R'Mel oil fields) frequently experience shade temperatures reaching +50°C to +55°C, while coastal facilities in Annaba face intense humidity and corrosive marine aerosol exposure.
Equipped with Class F or Class H copper windings and built-in PTC/PTO thermal cutouts, ensuring motor longevity under thermal stress and voltage fluctuations across Algerian power grids (220V single-phase / 380V three-phase at 50Hz).
Impeccably finished with electro-galvanized sheet steel or polyester powder-coated housings, preventing rust buildup in coastal areas like Algiers and Oran, as well as chemical degradation in gas processing plants.
All forward and backward curved metal impellers undergo dual-plane dynamic balancing to Grade G2.5 precision. This drastically minimizes vibration, operational acoustics, and premature shaft bearing wear.
Engineered to satisfy European Commission Regulation (EU) No 327/2011 (ErP Directive), reducing electrical power consumption for industrial ventilation by up to 28% without sacrificing static pressure or CFM output.
Selecting the optimal radial air blower requires evaluating static pressure output, total volume flow rate (CFM or m³/h), acoustic emission, and power draw against system resistance curves. The table below outlines parameters across our primary radial blower families engineered for Algerian industrial imports:
| Blower Category | Impeller Type | Power Range | Max Air Flow | Static Pressure | Target Applications |
|---|---|---|---|---|---|
| Double Inlet AC Centrifugal | Forward Curved Galvanized | 150W – 1500W | Up to 5,500 m³/h | Moderate (200 – 600 Pa) | Commercial HVAC, Kitchen Hoods, Cleanroom AHUs |
| Single Inlet High-Pressure Radial | Radial / Straight Steel Blades | 250W – 3000W | Up to 3,200 m³/h | High (800 – 2,500 Pa) | Pneumatic Conveying, Dust Collectors, Boiler Draft |
| Direct Drive Duct Extractors | Forward Curved Turbine | 100W – 1100W | Up to 2,800 m³/h | Moderate-High (350 – 750 Pa) | Exhaust Hoods, Industrial Drying, Machine Cooling |
| DC Engine Bearing Blowers | Steel Forward Blades | 50W – 500W | Up to 1,800 m³/h | Low-Moderate (150 – 450 Pa) | Telecom Enclosures, Solar PV Inverter Cooling |
Our CE-certified radial blowers and centrifugal direct-drive fans are deployed across critical infrastructure and manufacturing sectors throughout Algeria. By delivering application-matched static pressure profiles and high CFM volume, our blowers support operational continuity under challenging environmental conditions.
In oil refineries and natural gas liquefaction plants located in Skikda, Arzew, and Hassi Messaoud, ventilation fans must continuously purge enclosed electrical switchgear rooms and control cabinets to maintain positive air pressure. Our radial fans provide stable, spark-resistant positive airflow, preventing hazardous gas accumulation while maintaining thermal regulation inside control enclosures exposed to Saharan heat.
Algeria’s expanding cement manufacturing plants require heavy-duty radial fans for raw material drying, clinker cooling, and pulse-jet baghouse air filtration. Our high-pressure single-inlet radial blowers deliver up to 2,500 Pa of static pressure, forcing air through dense dust filter media to meet local environmental emissions standards.
Food processing, grain aeration, and large-scale commercial baking units in the Rouiba Industrial Zone and Blida area depend on our HOYOFAN 1100W and Kironmotor double-inlet centrifugal blowers. Designed for continuous grease, moisture, and high-temperature smoke extraction, these blowers prevent thermal buildup in commercial kitchens while maintaining smooth exhaust duct velocities.
In modern hospital developments, pharmaceutical plants, and commercial complexes across Algiers and Oran, low-noise airborne contamination management is paramount. Utilizing dynamically balanced forward-curved steel impellers, our blowers supply constant air volumes through HEPA and ULPA filtration banks with minimum acoustic footprints.
Navigating international supply chains, import compliance, and component durability requires partnering with an established global manufacturer. Altran Magnetics, LLC combines American engineering pedigree with rigorous ISO-certified manufacturing practices to support B2B buyers across North Africa.
Every radial blower fan family carries official European CE Declarations of Conformity under the Low Voltage Directive (LVD 2014/35/EU), Electromagnetic Compatibility Directive (EMC 2014/30/EU), and Machinery Directive (2006/42/EC).
We supply custom voltage and frequency windings engineered specifically for Algerian grid specifications (220V/230V 50Hz single phase, 380V/400V 50Hz three phase), mitigating line sag risks.
From mounting flange modifications and custom lead-wire harness lengths to customer-specific part numbering and private brand packaging, our engineering teams provide complete revision control.
100% of production units undergo automated electrical dielectric strength testing, insulation resistance validation, rotation direction checks, and vibration spectral analysis prior to packing.
We maintain transparent compliance files, full material composition data (RoHS and REACH statements), and step-by-step engineering CAD models to ensure seamless integration into your machinery BOMs.
Key information for procurement managers, engineering consultants, and importers in Algeria.
Yes. All our CE-certified radial blowers and centrifugal fan lines are shipped with formal Certificates of Conformity (CoC), full commercial invoices, HS Code classifications, and detailed technical datasheets. We routinely support documentation required for Algerian LC (Letter of Credit) transactions through local banks (e.g., BEA, BNA, CPA).
Our radial blowers engineered for North African export feature Class F (+155°C) or Class H (+180°C) copper wire insulation and dual-sealed precision ball bearings. They are rated to operate continuously in ambient temperatures up to +60°C without risk of thermal breakdown or premature winding failure.
Single-inlet radial blowers draw air through one side of the volute housing and are designed to produce higher static pressure, making them ideal for forcing air through filters, ducts, or grain beds. Double-inlet blowers draw air from both sides, delivering significantly higher CFM air volume at moderate static pressures, which is preferred for open-space HVAC and large kitchen exhaust hoods.
Absolutely. OEM customization is a core capability at Altran Magnetics. We can modify housing mounting patterns, outlet flange dimensions, terminal box orientations, capacitor wiring, and custom input voltages (e.g., 220V 50Hz, 380V 50Hz, or DC voltage platforms) according to your exact mechanical drawings.
We offer flexible shipping terms including FOB, CIF, and CFR directly to major Algerian container ports such as Algiers Port, Oran Port, Skikda Port, and Bejaia Port. Expedited air freight via Houari Boumediene Airport (ALG) is also available for urgent replacement projects.
