We Design. We Build. We Deliver.
High-performance magnetic contactors, definite purpose switching units, and high-voltage DC components engineered for heavy-duty operational resilience in high-ambient environments.
Exporting electrical control components to Iraq requires a deep technical understanding of the region's operational environments. The Iraqi power network presents extreme challenges: ambient summer temperatures frequently exceed 50°C in southern regions like Basra, severe voltage sags occur on municipal mains, and there is heavy reliance on private commercial diesel generators. Standard off-the-shelf AC contactors manufactured for temperate European or North American climates frequently fail due to thermal overload, coil burnout, and contact chattering caused by wide voltage fluctuations.
As a specialized manufacturer and global exporter, our engineering team designs AC magnetic contactors, definite purpose contactors, and high-voltage switching components specifically customized to mitigate the failure modes prevalent in Iraq's commercial, residential, and industrial infrastructure.
The Iraqi market for low-voltage power distribution and industrial control components is undergoing rapid evolution. Key drivers influencing procurement decisions for contractors, panel builders, and engineering importers include:
With localized generator networks functioning alongside municipal grids, demand for dual-power ATS contactors with wide coil operational bands (80% to 110% rated voltage) has risen sharply to handle unstable lines.
Government modernization of public hospitals, educational institutions, and airport infrastructure requires Class H insulated coils and flame-retardant thermoplastics (UL94-V0) to eliminate fire hazards in severe heat.
Factory owners in the Kurdistan region and central governorates are integrating rooftop solar with battery backup, creating high demand for combined AC grid contactors and epoxy-sealed DC battery relays.
Selecting the correct contactor category prevents contact welding, premature contact erosion, and excessive thermal buildup. The table below outlines core engineering specifications for our export product lines serving Iraq:
| Contactor Series | Utilization Category | Rated Current (Ie) | Coil Voltage Range | Ambient Operating Temp | Target Local Application |
|---|---|---|---|---|---|
| HVAC Definite Purpose (DP) | AC-8a / AC-8b | 20A - 90A (1-4 Pole) | 24V, 110V, 220V-277V AC | -40°C to +65°C | Residential & Commercial Air Conditioners, Chillers |
| Industrial Magnetic (NXC / LC1D) | AC-3 / AC-4 Heavy Duty | 9A - 630A (3 Pole) | 24V to 380V (50/60Hz) | -35°C to +60°C | Basra Oilfields, Water Pumping, Factory Motors |
| Switching Capacitor (CJ19) | AC-6b (Capacitive) | 12kvar - 100kvar | 220V / 380V AC | -25°C to +55°C | Power Factor Correction (PFC) Capacitive Panels |
| Modular DIN Rail (NTH8) | AC-1 / AC-7a | 20A - 63A (1-4 Pole) | 230V AC (50Hz) | -20°C to +50°C | Smart Home Distribution, Light Commercial Lighting |
| High Voltage DC (EVD / Relay) | DC-3 / DC-5 High Voltage | 50A - 400A (1000V DC) | 12V / 24V DC Auxiliary | -40°C to +85°C | Solar Inverter Disconnects, Commercial BESS |
With international compliance standards and engineering capabilities rooted in our US operations (Sterling, Illinois) combined with global manufacturing logistics, we provide Iraqi buyers with unmatched quality assurance and supply stability.
Our industrial and HVAC contactors utilize Class H (180°C rated) copper magnet wire paired with high-temperature epoxy encapsulation. This prevents insulation breakdown even when ambient panel enclosure temperatures hit 60°C in unconditioned outdoor sites across Basra and Nasiriyah.
We recommend our 3-pole and 4-pole NXC or LC1D-type AC-3 industrial contactors equipped with mechanical interlock blocks and electrical interlocking auxiliary contacts. These units withstand the high inrush currents of inductive motor loads and private diesel generator back-emf without contact sticking.
Yes. We regularly supply international inspection certificates, CE declarations, UL file numbers, and accredited lab test reports required by third-party inspection agencies (such as Intertek or SGS) to issue the mandatory Certificate of Conformity (CoC) for customs entry at Iraqi ports.
Standard AC-3 contactors experience severe contact erosion and high voltage spikes when switching capacitive loads. The CJ19 series includes leading-contact wire assemblies with damping resistors that suppress high-frequency inrush currents by up to 75%, extending capacitor bank lifespans significantly.
Standard model orders ship within 15–20 working days. Ocean freight shipments to Umm Qasr Port typically take 25–35 days in transit, while urgent air freight orders to Erbil International Airport or Baghdad International Airport arrive within 5–8 days.
Whether you are building custom ATS control panels, importing HVAC components for commercial projects, or specifying heavy industrial switching for oilfield applications, our engineering team is ready to assist with datasheets, sample evaluations, and competitive wholesale pricing.
